Connect With Us for Turnkey Interiors - Call Now

How to Make a Wooden Door: Complete Factory Production Process

How to Make a Wooden Door: Complete Factory Production Process

Most people see a wooden door only after it's hung, polished and fitted with a handle. What they don't see is the weeks of work that happen before that. The timber has to be picked, dried, cut, joined, sanded and finished, and every one of those steps decides whether the door will stand straight for twenty years or start sticking after the first monsoon.

At GSM Doors, we've been making doors since 2011 at our factory in Gandhidham, Gujarat. In this guide, we'll walk you through exactly how a wooden door is made in a factory, the way our karigars actually do it.

A factory-made wooden door is made in nine main stages: timber selection, seasoning (drying to the right moisture level), cutting and planing, frame and core making, joinery and assembly, panel or glass fitting, sanding, and finishing with PU or melamine polish. The last stage is a quality check, followed by packing and installation.

What Is a Wooden Door Made Of?

Before getting into the steps, it helps to know the raw materials. A good factory doesn't use one material for everything. It picks based on where the door will go and how it should look.

  • Solid teak (Burma teak): The first choice for main entrance doors and chaukhats. It's naturally oily, resists termites and holds its shape well in Indian weather.

  • Hardwood: Used for frames and internal stiles where strength matters more than grain.

  • HDHMR board: High-density, high-moisture-resistant board. It's stable, doesn't swell easily and takes paint beautifully, so it works well for flush and painted interior doors.

  • Glass: Toughened or frosted glass panels for doors that need light, like kitchen, study or partition doors.

  • Finishes: PU (polyurethane) paint, PU clear coat, or melamine polish to protect the wood and give it the final look.

You can see how we use these materials across our Premium Doors & Frames collection.

How a Wooden Door Is Made in a Factory: Step by Step

Step 1: Timber Selection

Everything starts in the timber yard. Logs and planks are checked for straight grain, knots, cracks and any sign of insect damage. Teak with dense, even grain goes to entrance doors. Pieces with small defects are set aside for hidden parts or rejected. A door can only be as good as the wood it's cut from, so this step is never rushed.

Step 2: Seasoning and Moisture Control

Freshly cut wood holds a lot of water. If you build a door with it, the door will shrink, crack or warp as it dries. So the timber is seasoned, either air-dried or kiln-dried, until its moisture content drops to roughly 10–12%. That's close to the humidity of a typical Indian home. Our team checks this with moisture meters before any piece moves to the cutting floor.

Step 3: Cutting and Planing

Once the wood is stable, it's cut to rough size and run through planers and thicknessers. This makes each piece flat, square and the exact thickness needed. Small errors here turn into big gaps later, which is why we rely on CNC and precision machines for this stage.

Step 4: Making the Frame and Core

A panel door is built around a frame of stiles (vertical pieces) and rails (horizontal pieces). A flush door has a solid or engineered core, often HDHMR or block board, covered with veneer or laminate. The chaukhat (door frame) that fits into the wall is made at the same time, to the same measurements, so the door and frame fit like a pair.

Step 5: Joinery and Assembly

This is where craftsmanship shows. Our karigars use mortise-and-tenon, dowel or tongue-and-groove joints, then glue and clamp the frame under pressure. Strong joints mean the door won't sag at the hinge side, even after years of daily use.

Step 6: Panels, Carving and Glass Fitting

Now the door gets its character. Raised panels, grooves, CNC carving or inlay work are added depending on the design. For a glass door design, the frame is routed to hold the glass, which is then fixed with beading and sealant so it doesn't rattle.

Step 7: Sanding

The whole door is sanded in stages, from coarse to fine grit. This removes machine marks and opens the grain so the finish soaks in evenly. Skipping proper sanding is the main reason cheap doors look patchy after polishing.

Step 8: Finishing (PU, Melamine or Paint)

The door is sealed, then finished in a dust-free booth. A PU painted door gets a primer, solid colour coats and a protective top coat. Natural teak doors get a clear PU or melamine polish that brings out the grain. Each coat is dried and lightly sanded before the next one goes on.

Step 9: Quality Check and Installation

Before dispatch, every door is checked for size, squareness, finish and hardware fitting. It's then packed carefully to avoid scratches in transit. Our team handles installation across India, so the door that left the factory is the door that ends up on your wall.

Which Type of Wooden Door Should You Choose?

The production process stays largely the same, but the material and finish change the result. Here's a quick look at the most popular options.

PU Painted Door: If you want a door that matches your wall colour or adds a bold accent, a PU painted door is hard to beat. The polyurethane coat is tough, easy to wipe clean and doesn't yellow quickly.

HDHMR Door: HDHMR doors are a smart pick for areas that see steam or water splashes. They cost less than solid teak but still feel solid and take a fine finish.

Glass Door Design: A wooden frame with a glass panel softens a space and lets natural light move between rooms. Fluted and frosted glass are popular right now because they give privacy without blocking light.

Doors are just one part of wooden home decor. When the door finish matches your wall panelling, wardrobes and furniture, the whole home feels planned rather than pieced together. Browse our catalogue for design ideas.

Why Homeowners and Architects Choose GSM Doors

We're not a trading company that buys doors and resells them. We make them ourselves, in our own factory, and that changes a lot.

  • 14+ years of experience making doors and wooden interiors since 2011.

  • Genuine seasoned Burma teak and high-density hardwood, chosen for stability and termite resistance.

  • 50+ skilled karigars working alongside CNC machines for both handcrafted detail and accuracy.

  • Custom sizes and designs, from grand pivot entrance doors to simple PU painted bedroom doors.

  • 10-year guarantee on our work.

  • PAN India execution, with a showroom in Gurugram, a branch office in Delhi and a factory in Gandhidham, Gujarat.

Want to see the craftsmanship up close? Visit our Gurugram showroom, read more about our journey, or contact our team for a free quote. You can also call or WhatsApp us at +91 99966 99904. For more guides like this one, head over to the GSM Doors blog.

Frequently Asked Questions

How long does it take to make a wooden door in a factory?

It usually takes 2 to 4 weeks, depending on design and finish. At GSM Doors, custom teak doors may take a little longer because of seasoning and hand finishing.

Which wood is best for a main entrance door?

Seasoned Burma teak is the best choice for durability and termite resistance. GSM Doors uses genuine seasoned teak for its entrance doors and chaukhats.

What is a PU Painted Door?

It's a wooden or HDHMR door coated with polyurethane paint for a smooth, durable colour finish. GSM Doors offers PU finishes in custom shades to match your interiors.

Is an HDHMR Door good for bathrooms?

Yes, HDHMR resists moisture and swelling better than regular boards. GSM Doors can suggest the right HDHMR finish for bathrooms and kitchens.

Can I get a custom Glass Door Design?

Yes, glass panels can be fitted into a wooden frame in frosted, fluted or clear styles. Share your idea with GSM Doors and our team will design it for you.

Why does seasoning matter in door making?

Seasoning removes extra moisture so the door doesn't warp, crack or shrink later. Every GSM Doors product uses moisture-controlled, seasoned wood.

Does GSM Doors deliver and install outside Delhi NCR?

Yes, GSM Doors handles manufacturing and installation across India, backed by a 10-year guarantee.


Chat with us